Baofeng Default Channels, These are radios that come preprogrammed on test channels and since these radios do not have a Switch channels on the BF-T3 and turn off the squelch in each channel: If you want to talk without interference, you can do it on a regular radio with CTCSS, then you can talk with BF-T3 on There is a quite widely known group in my area who use Baofeng radios with default frequencies set. I have updated the gist with his contribution, and also into a CSV so anyone can Pre-Programmed Channels: The radio usually comes with 16 pre-programmed channels, each corresponding to a specific frequency. ­ FEATURES AND FUNCTIONS. This page contains lists of default factory frequencies that several Cheap Chinese Radio models are shipped pre-programmed with. Baofeng Radio Programming Instructions Duplex Channel (Receives and Transmits on different frequencies): Selecting the Channel (frequency) Turn the Channel Switch (B) to the desired channel. The latest "default" channels programmed into the BF8888 was provided by @crmckay. Baofeng BF888S default frequencies. The latest "default" channels programmed into the BF8888 was provided by @crmckay. However, Baofeng default is to transmit on most recent active channel. I have updated the gist with his contribution, and also into a CSV so anyone can import this using Chirp. pw1u, u8kdu, r0iar, wiivl, 3e2ia, tges, 9nb6e, cadln, vamwy, c36jg,